Description
Construction
Tipple chamber with inner chamber and steam jacket made of stainless steel 304.
Jacket insulated by high grade glass wool to minimize the temperature loss. All sterilizer are hydraulically tested up to 2.5/times of working pressure. Joint less silicon gasket does not allow any leakage.
Design
- Ergonomic design.
- Energy efficient.
- Extra safe & uniform pressure.
- Radial locking arrangement.
- Hydraulic testing up to 2.5 times the working pressure.
- Guarantee supply of spares & service for 10 years.
- Onsite installation & after sales service through the company trained engineer.
Technical Specifications
- Design Type Cylindrical or Rectangular.
- Construction Triple Walled.
- Inner chamber SS 304 with full argon welding.
- External chamber SS 304.
- Finishing Mirror finished inner and external surface.
- Insulation High grade of Glass wool.
- Chamber condensate line: Fitted with steam trap and check valve.
- Working temperature: 121°C. • Working pressure 15 to 20 psi.
- Controller type: PID temperature controller / Digital timer controller with END cycle buzzer.
- Heaters ISI mark immersion heaters.
- Pressure: Automatic pressure control switch/ Analog dial type pressure gauge/Manual pressure release valves for chamber & jacket, pre and post vacuum cycles.
Quality Assurance
Each unit is factory tested to meet international guidelines and dispatched in ready-to-plug-in condition. Quest Scientific testing services are available to assist you in routine maintenance and revalidation.
TECHNICAL SPECIFICATION
- Design Type Cylindrical or Rectangular
- Construction Triple Walled
- Inner Chamber SS 304 with full argon welding
- External Chamber SS 304
- Finishing Mirror finished inner and external surface
- Insulation Glass wool
- Boiler Made of SS 304 sheet water inlet & outlet valves Water level glass window Boiler safety valve
- All Piping SS 304
- Chamber Condensate Line Fitted with steam trap and check valve
- Working Temperature 121°C
- Working Pressure 15 to 20 psi
- Hydraulic Tested On 40 psi
- Controller Type PID temperature controller Digital timer controller with END cycle buzzer
- Sensor PT100
- Heaters ISI mark immersion heaters
- Lid SS 304 W/ Pressure locking device
- Radial Locking System Chrome Plated MS
- Stand Chrome plated MS
- Pressure Automatic pressure control switch, Analog dial type pressure gauge Manual pressure release valves for chamber & jacket
- Multiport Valve Selection of sterilization, Only chamber pressure release Full chamber/jacket both pressure release
- Tray Perforated tray made of SS 304
- Standard Fittings Mains MCB, Silicon Gasket, Stream Trap, Pressure safety valve, Boiler safety valve
- Power Supply 440 Volts 50Hz,
- Optional Three Phase Working at 30 psi with 134°C, Provision of vacuum drying, Low water cut-off Digital pressure display, Auto release of pressure through solenoid valves Complete SS 304/SS 316 construction (GMP model), PLC + Color HMI with Data logging, USB interface, Ethernet, Thermal printer
MODEL NO / STANDARD SIZES / DIMENSIONS
| Model No. | Dia. x Height | Volume |
|---|---|---|
| QST-FHA-75C | 400 x 600 | 75 |
| QST-FHA-138C | 400 x 1100 | 138 |
| QST-PHA-185C | 550 x 750 | 185 |
| QST-FHA-235C | 500 x 1200 | 235 |
| QST-FHA-339C | 600 x 1200 | 339 |
| QST-FHA-552C | 750 x 1200 | 552 |
