Description
TECHNICAL SPECIFICATION
- Microprocessor Programmable controls Temperature: RT +5 to 150 °C.
- Door Lock:- lockable.
- Blower speed: Uniform enable disable.
- Alarm: Temperature Timer.
- Sterilization: Cycle.
- Process: Start. End.
- Castor:- Lockable.
- Air: Class 100.
CONSTRUCTION
Quest Tray Dryer is Double walled construction and stainless steel AISI 304 grade steel.
THE INNER CHAMBER
Tray Dryer is made of heavy gauge stainless steel sheet of SS-304 grade.
OUTER BODY
Fabricated out of Thick Mild Steel duly powder coated.
LOCK AND ARRANGEMENT
This door is provided with ball catch locking arrangement.
CASTER WHEEL
Tray Dryer the unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory.
STEEL SHELVES/ TRAY
Tray Dryer is supplied with 12 nos adjustable perforated shelves fabricated from SS sheets of 1.5mm Thick with rounded corners.
INSULATION
The gap between the walls is filled high-grade Glass wool, which ensures maximum thermal.
BLOWER
Tray Dryer Fan Motor Blower of 1 HP belt driven Aluminum Blower Fitted on a shaft for uniform Air circulation inside the dryer.
AIR CIRCULATING
Rapid air circulation to produce quick temperature equilibration and recovery, when needed Receptacles in-chamber, moisture -proof receptacle to provide uniform heat for in the tray dryer.
AIR HEATERS
Tubular Heaters With Fins Long lasting Stainless steel tabular heaters with fins for prevention from becoming red hot.
Capacity 1.0 KW mounted on sides Qty 04 Nos on the wall. Which ensure uniform heating due to better air circulation from all sides.
TEMPERATURE RANGE
RT+ 5 to 150°C with LED display with over Temperature safety protection and over current protection and air ventilation.
HANDLE
Eavy Duty for free movement stainless steel/ Mild steel. Glass wool insulation.
QUALITY ASSURANCE
Each unit is factory tested to meet international guidelines and dispatched in ready-to-plug-in condition. Quest Scientific testing services are available to assist you in routine maintenance and revalidation.
TECHNICAL SPECIFICATION
| Model | QST-TD-95 / QST-TD-180 / QST-TD-300 / QST-TD-500 / QST-TD-1200 |
|---|---|
| Technical Matrix For | Lab |
| Temperature Sensitivity | ±0.5°C |
| Temperature Range | RT +5 to 150 °C |
| Temperature Accuracy | ±1°C |
| Spatial Deviation | ± 0.5 °C |
| Readability | 0.5°C |
| Selves | 04Nos,/08 NOS/14NOS/22 NOS/26 Nos |
| Temperature Sensor | Double sensor PT 100 |
| Temperature Variation | +/1 deg C |
| Display | LED/LCD |
| Heat Load | 3 KW/5 KW/7.5KW |
| Nominal Voltage | 220-230 Volts, 50Hz Single Phase |
| Safety Device | Over temperature limiter switch prevents overheating |
| Type | Adjustable memmert type |
| Blower | Fan Motor Blower is mounted at the Rear wall for uniform Temperature |
